PSRIX and PSRIX2

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== PSRIX/PSRIX2 ======

The PSRIX/PSRIX2 instruments are based on the ROACH boards, which are designed and developed by the [[https://casper.berkeley.edu|CASPER consortium]]. These bare boards were turned in to pulsar instruments with firmware developed in-house, additional network switches and a small cluster of high performance computers. This configuration has resulted in a versatile infrastructure that enables the Effelsberg 100-m to observe pulsars over a wide range of radio frequencies. The instrument is designed to generate the three different types of data products (baseband, search mode and folded pulsar profiles) normally encountered in pulsar observations.

The [[pulsarinstruments:psrix_psrix2:psrix:index|PSRIX]] generates the three types of data with a maximum bandwidth of 500 MHz. The  [[pulsarinstruments:psrix_psrix2:psrix2:index|PSRIX2]] generates predominantly search mode data up to a bandwidth 8 GHz.

{{ :pulsarinstruments:psrix_psrix2.png?500 | An overview of the PSRIX and PSRIX2 instruments}}


===== Instrument Status =====

  * The [[pulsarinstruments:psrix_psrix2:psrix:status|PSRIX System Status]] 
  * The [[pulsarinstruments:psrix_psrix2:psrix2:status|PSRIX2 System status]]