projects:iram_obs [Fundamental Physics in Radio Astronomy]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== IRAM 30m Observations ======

==== Hardware ====

A ROACH2 board, RaspberryPi and a 1U rack-mounted computer together  make up the hardware for the upcoming Pico Velata observations. The set up is currently housed in the Digital lab. The ROACH2 board will generate a few 16 MHz base bands, and one of these bands will be recorded on the computer. A RaspberryPi is there to programatically control the sampling clock of ADC. The computer will also allow us to process and plot the data from the broadband continuum backend (BBC)

The computer has four network interfaces:
  - eth0 - bound to an ip-address through DHCP
  - eth1  - bound to 192.168.2.1 + ROACH2 (192.168.2.100) + RaspberryPi (192.168.2.200)
  - eth2/3 - 10GbE interfaces that receive data from the ROACH2  board

Software/OS setup on the computer:

  * Runs Debian Squeeze, 
  * Machine is assigned an ip of 134.104.22.254 via DHCP
  * packages installed: dspsr, psrchive, fftw, cfitsio, sigproc, gsl
  * Software packages are built under /data1/dump/build and installed in /home/pulsar/linux
  
== Pico Velata ==

  * Machine to get IP via DHCP (check NTP server as well)
  * Check

==== Test observations ====
Pulsar B2021+51 and B0355+54 were observed as a preparation to the actual magnetar observations at the IRAM 30m.

== PSR B2021+51 ==

  * Start time: 2014-06-11-23:14:50
  * Duration : 5402 seconds

**Notes**

  * Time series shows variations - weather perhaps? Distribution looks weird as well.
  * Folding with dspsr
  * periodicity search before and after de-baselining

Quick Links